|
Post by martinp on Sept 10, 2006 15:30:35 GMT
The gasget wher my exhaust joins the engine on my JINLUN 125 has blown and so in need of a fast replacement, any ideas or anyone breaking a 125 that can help me out ......
|
|
|
Post by Spaceprobe on Sept 10, 2006 18:01:18 GMT
|
|
|
Post by px166bajaj on Sept 10, 2006 18:44:49 GMT
If its just a little copper/packing ring, any bike shop should be able to help you. My Chunlan exhaust gasket happened to be the same size as a yamaha something or other.
|
|
|
Post by cb50j on Sept 10, 2006 21:43:19 GMT
exactly you could make one out of an oldbean can (scissors required) frosties packet(scissors required) hermetite do a high temp instant in tube
.......... C
|
|
|
Post by martinp on Sept 12, 2006 19:31:05 GMT
cheers guys think ive found some on ebay for 99p hope there right 30mm compression gasket does that sound right???
but i also need the long nuts that bolt it back on got some normal 10mm nuts but v fidly to get back any ideas?
|
|
|
Post by jialing on Sept 15, 2006 1:20:43 GMT
Id be carefull about nuts especially the long ones make sure you know where they been before you use em lol
|
|