Post by executivebexley on Jun 2, 2006 16:33:20 GMT
Helloo everyone!
Ive been having a rather odd problem with my scoots indicators! ive had a good hunt on old topics, as thats the most helpful but i cant find anyone with the same problem as me! so here goes
Ive got a Boatian BT50qt9 and basically when i turn the electric or engine on when the bike is cold all the indicators work fine but as soon as ive gone literaly 5 meters down the road, theyl all stop working but then come back too life when the bikes cooled down again.
surely if its cos the bikes hot and a wire is touching a hot part it would just melt the rubber and not work at all. ive also changed the relay and extra double checked all the connections under the front panel, ive even had a garage look at it quickly! but no luck!
any ideas? my arms getting tired from indicating!
Ive been having a rather odd problem with my scoots indicators! ive had a good hunt on old topics, as thats the most helpful but i cant find anyone with the same problem as me! so here goes
Ive got a Boatian BT50qt9 and basically when i turn the electric or engine on when the bike is cold all the indicators work fine but as soon as ive gone literaly 5 meters down the road, theyl all stop working but then come back too life when the bikes cooled down again.
surely if its cos the bikes hot and a wire is touching a hot part it would just melt the rubber and not work at all. ive also changed the relay and extra double checked all the connections under the front panel, ive even had a garage look at it quickly! but no luck!
any ideas? my arms getting tired from indicating!
