ray
Regular
Posts: 28
|
Post by ray on May 12, 2006 16:00:28 GMT
hi i got two small holes above small light and air intake on the front of my front panel in between my indicators anyone know what there for, they are coverd in two plastic covers that seem to be removable
cheers
|
|
|
|
Post by Scootin on May 12, 2006 18:07:03 GMT
I have those too, only mine are molded into the panel. They look like the are to be knocked out, when you use them for whatever it is those holes are for.
|
|
|
|
Post by ally1756 on May 12, 2006 19:14:18 GMT
i dont think i have these any chance of a pic?
|
|
|
|
Post by Gavin on May 12, 2006 21:19:43 GMT
hi i got two small holes above small light and air intake on the front of my front panel in between my indicators anyone know what there for, they are coverd in two plastic covers that seem to be removable cheers They are probably for fitting the Spirit of Extasy  www.autocentre.ua/ac/04/07/images/22/val-statuetka.jpg |
|
|
|
Post by Spaceprobe on May 12, 2006 21:20:24 GMT
In the older workshop book it shows two screws there for removing the front panel. Like the other posts these are now blanked out and I have one larger screw towards the top of the panel. A design change on the cheap I expect
|
|
madtim
Forum Master
Posts: 139
|
Post by madtim on May 12, 2006 22:56:07 GMT
yo ally you got the two holes on your scoot look at your pic you sent me there just below your sticker
|
|
madtim
Forum Master
Posts: 139
|
Post by madtim on May 12, 2006 22:56:47 GMT
i think good for leds lights maybe
|
|
|
|
Post by Brian.Cannell on May 13, 2006 5:50:28 GMT
Possibly using the two holes and the one above in centre for the mounting of a front rack.
|
|
|
|
Post by ally1756 on May 14, 2006 16:47:45 GMT
so i do lol!
dont know maybe for a different kind of sidelight?
|
|
|
|
Post by Scootin on May 16, 2006 17:36:47 GMT
"Spirit of Ecstasy"
That must be it! #rofl#
|
|
|
|
Post by Jenkos0wls on May 16, 2006 21:34:04 GMT
as we all know these bikes are copies of the honda Bali and Dio well on one of the bikes there is a front rack / Bow which looks ugly as hell so i can only think this is what they are for
|
|
|
|
Post by pagcelt on May 17, 2006 12:12:37 GMT
Maybe there for front fog lights, lol.
|
|
|
|
Post by Rusty on May 17, 2006 15:19:18 GMT
I brought an old second hand one a while back and it had this chrome trim attached to the holes and going all round the outside edge of the scooter. Looked very nasty!
|
|
|
|
Post by azuleverde on May 17, 2006 15:48:20 GMT
I brought an old second hand one a while back and it had this chrome trim attached to the holes and going all round the outside edge of the scooter. Looked very nasty! yea i have seen one of those as well, looks like a bumper or something. kind of looks like a reject for a carnival ride! lol ;D |
|
ray
Regular
Posts: 28
|
Post by ray on May 19, 2006 17:01:26 GMT
thanks people, seems like they could have many uses supose its a chance to add things using these holes as long as it looks good i thougfht of adding more lights small ones for extra visabilty to other road users. or maybe neons as suggested cheers ray
|
|
|
|
Post by onamission1989 on May 20, 2006 11:14:09 GMT
the hole on my front panel is for the horn
|
|
madtim
Forum Master
Posts: 139
|
Post by madtim on May 22, 2006 21:29:19 GMT
well i took allys idea just ordered bright white leds to fill the 2 holes as extra lights for nite riding just hope there not to bright and blind people.
|
|
|
|
Post by ally1756 on May 22, 2006 21:39:03 GMT
my idea? lol ok if u say so got a link tot he LEDs i fancy some! |
|
