|
|
Post by onamission1989 on Oct 5, 2005 21:05:19 GMT
My seat storage has broke, the lock works fine, i looked underneath and the catch that pushes the lock up over to release the seat is not puching over. Any one got any advice and does any one sell this part.
BT50qt-11 owner
|
|
|
|
Post by boobooboo27 on Feb 15, 2006 1:05:52 GMT
had the same problem and just fixed it..its an easy job once you got the panels off but you have to take all the panels at the back off and also the petrol tank...
i found that a bolt had come off holding the lever part...found that and put that on...then found the bracket where the locks bolts onto was bent back so you have to bend it forward..
any problems then email me...can add piccys if you need them..
|
|
