|
|
Post by lilmisswardi on Aug 8, 2005 22:42:33 GMT
Hey i don't suppose anyone knows why my horn isn't working my bikes a brand new BAOTIAN BT50QT-9 which i got from ebay.. is there anything am supposed to attach etc..  |
|
|
|
Post by Rusty on Aug 9, 2005 15:41:46 GMT
Have you traced the wires from the switch to the horn to make sure it is all connected ok? It should still be under warranty??
|
|
|
|
Post by stellabird on Sept 24, 2005 18:29:50 GMT
I have the same problem on my brand new Baotian BT50QT-9 which I also got from ebay. No warranty cos I bought it cash straight from the importer and registered it myself.  Any ideas folks? Have checked the wires as previously suggested. |
|
|
|
Post by bootaonline on Sept 24, 2005 18:40:53 GMT
Just turn the nut left or right i could'nt remember weather that was nut or Bolt Which Is Located where the cables are.i had the same problem with mine... i adjusted the thing and its working.try that and let us know
|
|
|
|
Post by stellabird on Sept 26, 2005 16:59:41 GMT
Just turn the nut left or right i could'nt remember weather that was nut or Bolt Which Is Located where the cables are.i had the same problem with mine... i adjusted the thing and its working.try that and let us know Thanks a lot - will give it a try!  |
|
|
|
Post by graham1 on Sept 30, 2005 19:53:15 GMT
try bending the horn. It worked for my sons bike
|
|
|
|
Post by ianf6512 on Oct 4, 2005 16:32:37 GMT
I had the same problem with one of mine, I took the front panel off and disconnected the wires from the horn, and attached them to a spare bulb I had, then I switch the ignition on and pressed the horn button which lit up the bulb, this confirmed that the wiring was OK and the horn was knackered, so I have asked the Internetbikeshop for a replacement.
Ian.
|
|
