|
|
Post by danidaley on Sept 13, 2006 16:59:59 GMT
???Hi, was wondering if anyone can help me. My crankcase cover cracked so i replaced it, but im having trouble putting all the bits back together, and when i start it it just crunches.
Am I right in thinking that all there should be is the half circle kickstart wheel, the return spring and the idler wheel, because ive been told that there should be an extra spring that should be between the idler wheel and what it connects with.
Any Info and diagrams mch Aprechiated
Thanks
Dan
|
|
|
|
Post by Scootin on Sept 13, 2006 18:28:29 GMT
I strongly recomend downloading the service manuals. You can find them on the main page on the left side. That will answer a lot of your questions. As for another spring-I just had mine open last week & I dont remember 2 springs. (Keyword-remember) The person who told you that may be thinking of the wire guide that goes in there.  |
|
|
|
Post by enu06 on Sept 13, 2006 19:45:48 GMT
The 2 springs are:- spring, kick starter, and spring, starter gear friction.
That is how they are worded in my copy of the manual, I think you can remember the 1st, its the second you are a bit vague on recollecting. Its a bit like an up-side-down peg shape.
|
|
|
|
Post by Macrofeet on Sept 15, 2006 15:50:23 GMT
if the electric start works you could allways remove the kick
|
|
