|
Post by bondingi on May 26, 2006 18:17:14 GMT
Well I have ordered parts from Scooter Assasins to get the Baotian 50cc damm bike to go 1 mph faster but I reckon the delivery people they use must use the same bikes. Ordered the bits and paid on the 16th and still no sign of them. They even advertise "FAST SHIPPING". Anyone else experienced such bad service.
I worked it out that if I left home on the 16th and rode the bike for 10 hours a day at 30mph (wish it would go faster), I would be in Outer Mongolia by now.
|
|
|
Post by ally1756 on May 26, 2006 19:02:21 GMT
derestrict it and dont dis it if you havent even tried to make it go faster and yes if u read scooter assasins are based in tapei so its takes 1-2 weeks
|
|
|
Post by bondingi on May 26, 2006 19:52:23 GMT
well I thought planes went alot faster these days and I wasnt "dissing (word up man )" the bike, I cant wait to get the bits to see the difference. Always thought sarcasm was the form of wit least understood. ;D
|
|
|
Post by Rusty on May 26, 2006 20:49:51 GMT
He has a point Ally. Who says 'dis' these days !!! #8#
|
|
|
Post by ally1756 on May 26, 2006 21:59:19 GMT
dis isnt an old word (is it lol) u know what i mean ure saying oh its so slow and all this if its only doign 30mph then u obviusly havent derestricetd therefor ordering parts wont make a difference unless its a cdi
|
|
|
Post by biglee on May 26, 2006 22:05:24 GMT
ally i think let him slag the bike off its his and his not slaging off your so dont get upset about it. allys right derestrict the bike before putting new parts on.
|
|
|
Post by ally1756 on May 26, 2006 22:29:19 GMT
yeah it just does my tits in when ppl slag it and they dont have a clue what theyre on about
|
|
|
Post by bondingi on May 27, 2006 17:00:42 GMT
sorry ally, but I know which button to press with you now!! Anyway the parts did turn up this morning, (big breakfast bowl of words this morning). The bike is derestricted already and my main aim was to get it to go faster, faster if you see my point. I have put 5gm rollers in and also a 36mm sleeve. Does putting the shorter sleeve in make the kick start not engage. Also when pulling away there seems abit more delay than before and then a better rush of acceleration. I bow down to your greater knowledge and would appreciate your comments.
ps man boobs are not fashionable
|
|
|
Post by biglee on May 27, 2006 17:18:53 GMT
kick start should engage have alook if youve put the sleeve in right and i had the acceleration problem i did my valves and my scooter is running great now, so have alook at the valve cleance.
ps you cheeky little s**t #rofl#
|
|
|
Post by Macrofeet on May 27, 2006 19:28:01 GMT
Yeah valves improve the speed alot
take time to tune them with a feeler gauge its worth it
For exhaust tappet (0.06-9)
0.05 bar will slide under with no resistance, the 0.10 will slide under but be tight
Other
0.05 bar will slide under with the lightest of pressure 0.10 will not fit unless much force is added
|
|
|
Post by ally1756 on May 28, 2006 15:00:55 GMT
grrr......
|
|
|
Post by bondingi on May 28, 2006 18:47:28 GMT
thanks for being a good sport Ally, hopefully I can help someone else one day.
I tried the 36mm sleeve and it causes the teeth on the driving pulley to just foul with the cog on the starter bendix. Also as the driving pulley moves about 3mm towards the starter bendix (original sleeve 39mm) it also stops the kick start working as that now doesnt engage with the starting pulley (still with me everyone!!). Mine is a 2005 model and I guess you cannot put a 36mm sleeve on all these bikes. I have put the lighter rollers in, 4.9gm and along with the NGK plug I put in a few weeks ago it goes very well and will get 40-45mph and 30 on a hill. Not sure I want to go faster on chinese rubber. If anyone wants to buy the roller it yours for a fiver inc. If you have got Paypal let me know, Ill give you my address otherwise we can sort something else out
|
|
|
Post by stelvslucie on May 28, 2006 20:44:49 GMT
it tuck 10 days for my carb and jet to come
|
|