|
|
Post by bondingi on May 13, 2006 17:51:10 GMT
I have got a BT50qt-9. Now its only done 150kms and was destricted from new. From standing it will accelerate to 35-38mph quite happily, however if you slow down to about 15-20mph and want to go faster again, it really struggles. It accelerates much better from rest. It also seems that with this scooter you either put the throttle on full or not at all to get the engine to respond. Does it get any better/responsive or would changing the rollers help. Some advice please
|
|
|
|
Post by BillyGreen1973 on May 13, 2006 18:43:28 GMT
The problem your having is the main spring in the clutch is not strong enough.
Replace it with a stronger one and that will give you better acceleration in the situation your talking about.
I've got the same scooter, I have also got a new spring, just needs fitting!
|
|
|
|
Post by bondingi on May 14, 2006 16:39:09 GMT
can you let me know where you got the spring from
|
|
jason
Forum Master
Posts: 175
|
Post by jason on May 14, 2006 16:46:32 GMT
ive got the same problem ...are they easy to replace
|
|
|
|
Post by cb50j on May 15, 2006 1:32:58 GMT
|
|
|
|
Post by BillyGreen1973 on May 15, 2006 15:53:05 GMT
Thats where I got mine from.
They are a little difficult to change, but a garage should be able to change it for you in around 30 mins.
|
|
|
|
Post by bondingi on May 16, 2006 19:20:10 GMT
which spring the 1500rpm or 2000rpm??
|
|
