|
|
Post by barnard on May 1, 2006 20:35:59 GMT
Anyone know of any Garages in London who will work on a Jinlun/Chinese scooter, my Jinlun desperately needs servicing.  I wish I knew of a Mobile scooter mechanic like the forumite mmm2 in the Cheshire area.  Any Londoners on the forum? |
|
|
|
Post by hypojam on May 1, 2006 20:45:52 GMT
Best to do it yourself....
Its Much better that way
|
|
|
|
Post by barnard on May 1, 2006 20:58:06 GMT
I've tried! I took the cover off the Transmission belt case just before christmas, trying to track down a noise, and this made the kickstart fall out and its taken me until now to get the spring back in that made the kickstart spring back into position.  Wha I need is someone to listen to the bike and workout whats needs replacing, it makes a funny noise and I don't know whether its the tapits or a hole in the exhaust.   |
|
|
|
Post by barnard on May 1, 2006 21:32:15 GMT
|
|
|
|
Post by ally1756 on May 1, 2006 22:36:56 GMT
its for a 150cc engine i dont think it will sorry  |
|
|
|
Post by enu06 on May 2, 2006 6:54:49 GMT
Check to see if its 'e' or 'E' marked, and approved, if not it could cost you an on the spot fine or chucked out at the next MOT.
|
|
|
|
Post by barnard on May 2, 2006 7:53:04 GMT
The scooter is 'e' marked thankfully, its got a DVLA registration as well Is there a tappet setting guide on the forum yet? |
|
|
|
Post by enu06 on May 2, 2006 9:16:37 GMT
I actually meant the new/replacement exhuast system., that has to be marked to conform.
|
|
|
|
Post by cb50j on May 2, 2006 18:58:51 GMT
|
|
