|
|
Post by biglee on Apr 26, 2006 18:38:10 GMT
my taishan 50cc keeps cutting out. i start it and its ok i rev it,then let it go back to tick overand it cuts out. what wrong with it, its done 3300km, is derestricted and 4.7g rollers.
|
|
|
|
Post by ally1756 on Apr 26, 2006 19:27:56 GMT
u need to adjust your idle screw, open the seat then open the plastic cover at the bottom and ull see the carb, twist the throttle a few time and you'll see where the screw is, tighten it up a little with the engine running and you'll hear the revs increase ally  |
|
|
|
Post by biglee on Apr 26, 2006 19:41:59 GMT
Will do but the scooter is also running very bad under power. so might not just be the idle screw.
|
|
|
|
Post by ally1756 on Apr 26, 2006 21:12:38 GMT
what is it doing? misfiring?
|
|
|
|
Post by tls2571 on Apr 26, 2006 21:48:36 GMT
You might want to check your fuel filter or the jets in your carb.. Troy Will do but the scooter is also running very bad under power. so might not just be the idle screw. |
|
|
|
Post by biglee on Apr 27, 2006 14:25:46 GMT
fixed tuck carb off cleaned and put back works fine.have also done idle screw. thanks for all the help
|
|
|
|
Post by enu06 on Apr 27, 2006 15:09:06 GMT
Put an inline fuel filter in, it stops muck getting into the carb, and you can see fuel flow. I got a Polini mini-moto one off ebay For £4 .25 all in.
|
|
|
|
Post by biglee on May 4, 2006 20:51:05 GMT
not fixed doing the same thing as before, i think the scooter is flooding. starts ups and goes ok untill you stop it just cuts out. help whats wrong?
|
|
