|
Post by djrobb on Apr 20, 2006 19:51:31 GMT
Can anyone tell me if the nut holding the rear wheel on is a left or right hand thread? having real trouble getting the rear wheel off the other halfs bike to repair a pucture. Cheers guys!
|
|
|
Post by azuleverde on Apr 20, 2006 20:57:06 GMT
its right handed,.. takes some force,. try using a rubber hammer on the wrench (better if you had a impact) hope that helps. 24mm #thumbs_up#
|
|
|
Post by djrobb on Apr 21, 2006 21:05:03 GMT
Cheers mate,, tried hammers, extension pipes and an impact wrench!!!! Still can't get the bugger loose!!!
|
|
|
Post by tomiam on Apr 22, 2006 8:34:10 GMT
To give you some idea... I have a 1.5m metal pipe on the end of the wrench at the same time as two people sat on the bike (pushes tyre into the ground) and holding the rear brake full on! It only just let go with all that force on it.
|
|