|
Post by ally1756 on Mar 17, 2006 11:02:55 GMT
Hey guys wheres the air/fuel mixture screw? ally
|
|
|
Post by cb50j on Mar 17, 2006 14:06:15 GMT
it's not the arrowed one, it's the one behind the rubber hose......... ............... #sprint#
|
|
|
Post by ally1756 on Mar 17, 2006 14:46:21 GMT
lol thanks i found it eventually
|
|
|
Post by zloog on Aug 19, 2006 15:59:41 GMT
Heeeeeeeeeeeeeeeeelp, this is doing my nut in! WTF is the screw? The only one I can find lets loads of fuel pour out everywhere. I know the pic says it is behind the rubber pipe but where? Also is it fairly easy to get to? I have removed the seat and front panel.
Ta
|
|
|
Post by cb50j on Aug 19, 2006 16:33:21 GMT
gee whiz............
it's the only other visible screw head in the pic, 50mm above the arrowed one,slightly to the left visible,but slightly obscured by the open ended rubber hose???
........ C
|
|
|
Post by zloog on Aug 20, 2006 9:24:12 GMT
LOL, thankyou! I was looking in the wrong place. When you said it was behind the rubber pipe I thought it was the pipe at the bottom! Cheers
|
|
|
Post by ally1756 on Aug 22, 2006 2:28:32 GMT
lol * shakes head*
i love posts like that
|
|
ken
Newbie
Posts: 4
|
Post by ken on Aug 24, 2006 7:18:12 GMT
When I turn the screw clockwise..does it decrease the amount of air? ...or vice verca?? When you turn the screw clockwise it reduces the amount of fuel.
|
|
|
Post by mauiscoot on Sept 16, 2006 3:00:44 GMT
How much shoud it be turned?
|
|
|
Post by Macrofeet on Sept 17, 2006 18:15:34 GMT
i'd set it to 2 1/2 turns out from tight
|
|
|
Post by krajes on Sept 18, 2006 19:16:03 GMT
try half turn at the time and test to find best seting for your bike. I,d set 3 turns out from tight on my Sukida sk50qt
|
|
|
Post by tungy999 on Sept 26, 2006 11:32:31 GMT
hi when i yurn my mixture screw it seems to do nothing
|
|
|
Post by tungy999 on Sept 26, 2006 11:32:57 GMT
turn i mean
|
|
|
Post by krajes on Sept 26, 2006 19:12:01 GMT
did you remove bras screw from carb cower and change setting on your needle?
|
|
|
Post by tungy999 on Sept 27, 2006 8:50:29 GMT
my needle hasnt got any settings on and yes the screw is out and ive sorted the mixture now
|
|
|
Post by tungy999 on Sept 27, 2006 11:23:49 GMT
it dies at a certain amount of revs wondering if its a weak spark not the mixture screw
|
|
|
Post by tungy999 on Oct 18, 2006 14:24:56 GMT
hi what do i set my mixture as ive fitted a 90 jet without racing air filter thanks
|
|