|
Post by Jenkos0wls on Mar 5, 2006 21:16:08 GMT
Iv noticed Quite a few people are buying the CDI Unit from scooter assasins. and then finding that there 6 pin connection block doesnt fit there 6 pin split box. well as we all now these bikes are basically a honda well look on the honda page of the website and go onto the Dio model this is the same bike bike as what most of us have got. and if you look at the CDI on there you see that it is a 6 Pin single block. best bet is that this is the part we should all be buying. Those of you who have looked at the CDI and Website will now what i mean. if somebody does buy this and it does seem to work then tell us all Please. hope this helps
|
|
|
Post by cb50j on Mar 5, 2006 22:11:42 GMT
I've got the cdi, bigger jet and freeflow filter, did notice that clutch springs and variator parts were also dio(and other) parts listed on honda page
................ #sprint#
|
|
|
Post by Jenkos0wls on Mar 6, 2006 18:45:42 GMT
What i think probably has happend is that When these chinese companys bought the idea of the frames and engines on these bikes they must have sold them the Dio model which is why the BT49qt-9 is the same so i think buying parts on the dio page should fit just as good on the chinese page.
|
|
|
Post by BillyGreen1973 on Mar 6, 2006 18:55:58 GMT
I ordered the Honda Dio No Rev Limit CDi (small black one), it does have the same plug. However I couldn't test it as my bike is off the road at the moment. I have also ordered the 'Race' CDi for the Honda Dio.
I will keep you all informed
|
|
|
Post by Macrofeet on Mar 6, 2006 20:36:01 GMT
if it works i'll be getting i thinks
also
i recently switched the coil and lead out of my 125cc into my 50cc to test if it was working okay it worked fine but the supprising thing was it lost speed about 2mph so the coil must have been weaker probably worn a bit
with this in mind i'm thinking the race coil off assasins may be better then stock and give very slight preformace increase 1 or 2 mph
|
|