|
|
Post by ronaldihino1 on Mar 1, 2006 11:41:26 GMT
i ordered some new 4g rollers from beedspeed couple of days ago and got em today. Is there anyway I can put them on without usin and impact wrench as I dont have one and dont have the money for one either. Is there an easy way of doing it without the impact wrench?
|
|
|
|
Post by Macrofeet on Mar 1, 2006 12:34:24 GMT
you could try using a bit of wood there is a guide for this someware
|
|
|
|
Post by ally1756 on Mar 1, 2006 13:35:15 GMT
its only like 9 quid for an impact wrench, its worth it i sue mine all the time ally  |
|
|
|
Post by cb50j on Mar 1, 2006 21:02:12 GMT
if you're stuck, it's worth trying to find a couple of posts to do with using a lump of wood and a screw driver around....I've done mine a couple of times with just a screwdriver to do required jamming
................ #sprint#
|
|
|
|
Post by zhongyudave on Mar 2, 2006 19:21:04 GMT
i did mine with a couple of mole grips, a screwdriver in the teeth and a hammer. there was a lot of frustration and swearing involved. buy yourself an impact wrench from argos pal!  |
|
|
|
Post by ronaldihino1 on Mar 3, 2006 12:23:59 GMT
yea i think i will just buy one from argos cause there only at 8 quid now, it'll save me sum hassle i suppose lol. the rollers i've got are 4.1g. should i put all 6 new rollers in or mix them up with the older ones?
|
|
|
|
Post by cb50j on Mar 3, 2006 12:25:21 GMT
try both, see what you prefer......
.................... #sprint#
|
|
|
|
Post by Macrofeet on Mar 5, 2006 17:06:52 GMT
i'd mix m8
|
|
