|
Post by ally1756 on Feb 24, 2006 11:39:14 GMT
guys i really need help with this, i need a picture of the position of the mainstand, i cant work out which way it goes on. and any tips on how to get the springs on? ally
|
|
|
Post by Macrofeet on Feb 24, 2006 12:16:49 GMT
yeah
2 long screw drivers
put end of spring on one screw driver and one screwdriver on other end
then stand on 1 screw driver and pull the spring quite hard to loosen it up a little not to much springs should click on much easyer
|
|
|
Post by Macrofeet on Feb 24, 2006 12:20:15 GMT
as for which way it goes look for the flat bit on the end you stand on to pull the bike onto the stand so this will face up
|
|
|
Post by Macrofeet on Feb 24, 2006 12:35:20 GMT
oh yeah forgot to say you pull the bike backwards onto the stand
the stand will drop down from the back otherwise if it could come down while you was going along you'd get catapulted into the sky
|
|
|
Post by ally1756 on Feb 24, 2006 13:11:38 GMT
ok does the bit u stand on go n the left or the right?
|
|
|
Post by BillyGreen1973 on Feb 24, 2006 15:51:39 GMT
It goes on the left.
|
|
|
Post by ally1756 on Feb 24, 2006 15:54:34 GMT
its on now i used a long screwdriver and put it into the metally hole bit next to the bit that the spirng holds onto and pushed the screwdriver untill the spring caught onto the knotch and magic its on and working now! just need to sort the electric start and the horn and brake light now, i cant see any loose connections :? ally
|
|
|
Post by Macrofeet on Feb 24, 2006 16:02:29 GMT
glad to here it fella when i first tryed to fit mine like that the one side was okay the otherised was a bugger it pinged off down the road
|
|
|
Post by ally1756 on Feb 24, 2006 16:55:17 GMT
yeah i only have one side on icos the other flew off lol
|
|