|
|
Post by ally1756 on Feb 23, 2006 15:46:33 GMT
hey guys got my new scoot today (bt50QT9), assembled it all apart from the main stand which i cannot get on, only my sidelights and indicatros work, i have tried starting it from the remote but it just keeps truning over and doesnt cathc on, topped up the oil, topped up the petrol, still no joy, all the connections are intact, help  ally  |
|
|
|
Post by hypojam on Feb 23, 2006 16:03:17 GMT
Take the spark plug out and see if its sparking, also check the side stand is up cos it acts like an immobiliser whens its down and also check to see if it has cylinder compression, if not check the valve clearances. Most likely an electrical fault somewhere  |
|
|
|
Post by shabba01 on Feb 23, 2006 16:46:00 GMT
If you haven't fitted the main stand yet, are you trying to start on the side stand?
As Hypojam said it won't start on the side stand at all. I did the same thing when I got my scooter, put the main stand on or start it with the side stand up. If it still doesn't start then see the post above from hypojam again!!
Good Luck! #thumbs_up# #thumbs_up# #thumbs_up#
|
|
|
|
Post by onamission1989 on Feb 23, 2006 17:24:54 GMT
hey guys got my new scoot today (bt50QT9), assembled it all apart from the main stand which i cannot get on, only my sidelights and indicatros work, i have tried starting it from the remote but it just keeps truning over and doesnt cathc on, topped up the oil, topped up the petrol, still no joy, all the connections are intact, help ally you must have the 2006 model with remote start and alarm |
|
|
|
Post by ally1756 on Feb 23, 2006 17:29:26 GMT
yeah i have that the alarm is very loud and very senestive but should stop chavs having a go at it  i am really struggling with the main stand, the springs are so hard to get on and it doesnt show you which way it goes, any pics of the main stand and any tips on the springs would be greatly appreciated, i ripped my jeans on the damn chinese container thingy i can smell petrol when its turning over by the exhaust so i think i have compression just think theres no spark, where is the spark lol, i cant find it ally |
|
|
|
Post by ally1756 on Feb 23, 2006 17:36:16 GMT
reckon it will be the spark?
|
|
|
|
Post by BillyGreen1973 on Feb 23, 2006 18:06:25 GMT
It's most probably your side stand. Have you tried to start it using the start button on the handlebars instead of the remote start. You do need to hold the brake ON while you try and start it too.
|
|
|
|
Post by ally1756 on Feb 23, 2006 18:16:09 GMT
yeah the start on the hande bar does nothing, dont know if ive tried with the side stand up i will try tommorow, thanks ally |
|
|
|
Post by BillyGreen1973 on Feb 23, 2006 18:23:22 GMT
Yeah, you need to start it with the side stand up and the back brake pulled. The starter won't work anyother way.
|
|
|
|
Post by ally1756 on Feb 23, 2006 18:39:38 GMT
just tried it with the side stand up, didnt even turn over ally |
|
|
|
Post by shabba01 on Feb 23, 2006 19:39:24 GMT
Does it start with the side stand up, back break pulled and with the kick start?? #dunno#
|
|
|
|
Post by ally1756 on Feb 23, 2006 22:00:59 GMT
nope
|
|
|
|
Post by chcknugget on Feb 24, 2006 3:36:25 GMT
Did you put the key in? hahaha. Remember you HAVE to pull the brake lever to use the starter button. Otherwise it should kick start just fine if the stand is hooked up right, but I'm not sure because the scooters in the states do not have the sidestand sensor.
My headlight is only powered when the scooter is on, so don't worry about that.
|
|
|
|
Post by ally1756 on Feb 24, 2006 10:04:51 GMT
its definately and electric problem im gonna have a fiddle around today will let u know ally |
|
|
|
Post by ally1756 on Feb 24, 2006 11:40:49 GMT
ok got it going on the remote start, but cant get the horn to work or the starter on the handles bars so i think i have a loose connection sumwhere, also i cant get the main stand on so that doesnt help ally |
|
i am really struggling with the main stand, the springs are so hard to get on and it doesnt show you which way it goes, any pics of the main stand and any tips on the springs would be greatly appreciated, i ripped my jeans on the damn chinese container thingy 
