|
|
Post by stunna1 on Feb 21, 2006 3:00:45 GMT
 just the other day my scooter was running fine and all the sudden..it died..i tried to start it but it just would keep turning over and then when i stopped the gas is leakin out the plastice tube on the side and somewhat out the carb. when i hold the throttle it starts up but it cuts right out..i even held it down and it just hesistates like it dont wanna go anywhere. Im tryin to figure out and see if its the that side screw that i adjusted wrong or could it be the spark plug isnt gettin enough juice...alot of gas is coming out and no turn over. it runs when the pin and plastice things is off but once i put it back in...it dies..i took that cdi or is it the choke thats on the side of the carb? could i replace the carb with a manual choke? someone help
|
|
just the other day my scooter was running fine and all the sudden..it died..i tried to start it but it just would keep turning over and then when i stopped the gas is leakin out the plastice tube on the side and somewhat out the carb. when i hold the throttle it starts up but it cuts right out..i even held it down and it just hesistates like it dont wanna go anywhere. Im tryin to figure out and see if its the that side screw that i adjusted wrong or could it be the spark plug isnt gettin enough juice...alot of gas is coming out and no turn over. it runs when the pin and plastice things is off but once i put it back in...it dies..i took that cdi or is it the choke thats on the side of the carb? could i replace the carb with a manual choke?