|
|
Post by dmilo on Feb 20, 2006 19:21:22 GMT
Hey all, After the carb has been upjetted I know I need to adjust the fuel mixture as billy said .I included a pic with an arrow is this the screw???  thanks dmilo |
|
|
|
Post by cb50j on Feb 20, 2006 20:19:46 GMT
that's the one
.................. #sprint#
|
|
|
|
Post by dmilo on Feb 20, 2006 20:55:40 GMT
Thanks cb !!
|
|
|
|
Post by dmilo on Feb 22, 2006 21:25:19 GMT
Hey,
which way will I need to turn the screw? clockwise or counter clockwise
dmilo
|
|
|
|
Post by hypojam on Feb 22, 2006 21:49:57 GMT
Clockwise turns the screw in which makes the mixture richer Screw it all the way in but be gentle! and then turn it out 2 and half turns  |
|
|
|
Post by dmilo on Feb 22, 2006 23:14:28 GMT
Hi all,
one more question
getting ready to upjet my carb Billgreen's how to is excellant !! but one thing he left out disconnecting the throttle cable and re attaching it
thanks
dmilo
|
|
|
|
Post by hypojam on Feb 22, 2006 23:18:49 GMT
Its pretty simple...Bit hard to explain but you will easily see how to once your there |
|
|
|
Post by dmilo on Feb 22, 2006 23:20:47 GMT
Any photos available I would greatly appreciate it . If not I will see when I get there
thanks Hypojam
|
|
|
|
Post by hypojam on Feb 22, 2006 23:46:53 GMT
 Best ive got, just undo those 2 nuts and slide the cable end from the throttle thing  Hope this helps  |
|
|
|
Post by BillyGreen1973 on Feb 23, 2006 9:28:39 GMT
I did it without disconecting the throttle cable!!
I just turned the carb upside down in the bike to work on it.
|
|
|
|
Post by dmilo on Feb 23, 2006 13:24:07 GMT
Thanks Billygreen and Hypojam
|
|
