|
Post by mattclay10 on Feb 20, 2006 15:37:47 GMT
i have recently brought, the Race Torque Spring 2000RPM Uprated Spring Single Large Spring That Fits between the clutch and the Rear Pulley does anyone know how to fit one if so how? could anyone post a picture(s) to show me how?
|
|
|
Post by chcknugget on Feb 20, 2006 15:46:24 GMT
i have recently brought, the Race Torque Spring 2000RPM Uprated Spring Single Large Spring That Fits between the clutch and the Rear Pulley does anyone know how to fit one if so how? could anyone post a picture(s) to show me how? Why did you get it? What do you expect it to do?
|
|
|
Post by mattclay10 on Feb 20, 2006 16:25:11 GMT
i was told by a scooter specialist that it would dramatically increase my poor acceleration.
|
|
|
Post by hypojam on Feb 20, 2006 16:30:03 GMT
Lighter rollers is what you need
|
|
|
Post by chcknugget on Feb 20, 2006 16:32:40 GMT
i was told by a scooter specialist that it would dramatically increase my poor acceleration. Yep, a tighter spring would help in theory, but I have no firsthand experience. Good Luck!
|
|
|
Post by hypojam on Feb 20, 2006 16:33:15 GMT
Here are some pics anyways, hope they help:
|
|
|
Post by chcknugget on Feb 20, 2006 16:34:36 GMT
O, what you have to do is remove the rear clutch. You can use an impact wrench for this, or borrow an air conditioner clutch removal tool, or stick a screwdriver through the clutch drum to hold it while you take the outter nut off. After that I'm pretty sure everything should come off fine until you get to the spring.
|
|
|
Post by baotian on Feb 20, 2006 18:08:36 GMT
hypoja, for those pictures you have broght the sae clutch springs as e but i have not yet fitted them, is there any difrence in performance and power?
|
|
joe
Regular
Posts: 48
|
Post by joe on Feb 20, 2006 20:52:17 GMT
How did you hold the clutch housing when you undid the nut ?? concerned that may distirt if put in vice !!!
|
|
|
Post by hypojam on Feb 20, 2006 22:51:39 GMT
Just hold the clutch housing in your hand and turn, its pretty easy to undo No difference atall when i changed my clutch springs to the performance 2000rpm ones
|
|