|
Post by dave7923 on Feb 20, 2006 13:51:34 GMT
I recently had starting problems with my BQT11 and got that fixed by replacing the side stand switch. Now I have a problem getting the scoot moving! If I use full throttle for more than a few minutes, the power drops really badly and I can't get the scoot to rev up. If I leave it for a few minutes it returns to normal. If I run the scoot at 3/4 throttle then it seems to be OK...ish. I'm suspecting the auto choke or something like that so can anyone help with suggestion what to check and how? Thanks haggismcduff@hotmail.com
|
|
|
Post by hypojam on Feb 20, 2006 14:02:53 GMT
Carb issues Strip and clean the carb(including the jets), that should fix it, and then adjust the fuel mixture screw to 2 and half turns out from in.
|
|
|
Post by hypojam on Feb 20, 2006 14:04:02 GMT
Might also be worth to check your valve clearances Hope this helps
|
|
|
Post by Macrofeet on Feb 20, 2006 14:13:38 GMT
It will be
blocked main jet Jet to small broken fuel valve
had same problem replaced fuel valve and carb
if you can unscrew the underside of your carb should be an easy fix if you follow guide
|
|