|
Post by biglee on Feb 16, 2006 17:38:35 GMT
i changed my rollers from 6 gram ones to 3.9 grams but there is no differences. just lost top end, should i put 3 6 gram and 3 3.9 gram would this be better?
|
|
|
Post by hypojam on Feb 16, 2006 17:44:06 GMT
Yea try a mix of 3.9's and 6's
|
|
|
Post by biglee on Feb 16, 2006 17:48:55 GMT
ok will do tomorrow and i will tell you how i get on. thanks for the help hypojam
|
|
|
Post by chcknugget on Feb 22, 2006 23:19:35 GMT
ok will do tomorrow and i will tell you how i get on. thanks for the help hypojam How did it go? There is something whack with the way these Chinese rollers are designed. The weight of the rollers SHOULD NOT deteremine the top speed unless 2 reasons: 1) The rollers weigh way too much or too little 2) The engine is not generating enough rpms/speed to push the rollers all the way out. The rollers should only affect acceleration (a shift point) and not top speed! I wish we had a closed environment to experiment in!
|
|
|
Post by al300ex on Feb 22, 2006 23:45:38 GMT
Do you have any pics of your carb setup?
|
|