|
Post by onamission1989 on Jan 21, 2006 14:35:29 GMT
Couldnt derestrict my scooter today, one of the screws over the carb cover had lost its +, so i cant get it out,
bugger
|
|
|
Post by hypojam on Jan 21, 2006 14:39:42 GMT
That sucks Drill them out or cut a grove into the top of the screw and then try and undo it with a flat headed screw driver Thats if u really wanna derestrict
|
|
|
Post by Macrofeet on Jan 21, 2006 16:26:26 GMT
if you mean the screws on the cap, allthough they are flat you might be able to remove with the right plyers as they should not be overly tight as the cap is plastic
|
|
|
Post by cb50j on Jan 21, 2006 18:16:32 GMT
any joy? #sprint#
|
|
|
Post by onamission1989 on Jan 22, 2006 14:29:38 GMT
no luck, i dont want to knacker the screw, in case it breaks and i cant get another, unless anyone has got a spare?
|
|
|
Post by hypojam on Jan 22, 2006 14:38:11 GMT
Could just make another screw up! Find a screw/bolt that has the same thread and then cut it down to the correct size and then taper the end slightly. Requires some effort but it will do the job
|
|
|
Post by baotian on Jan 22, 2006 14:38:24 GMT
no problem there, as i have a shop near me that can custom make screws, so if you knaker yours up i will send you another mate
|
|
|
Post by onamission1989 on Jan 22, 2006 17:41:57 GMT
no problem there, as i have a shop near me that can custom make screws, so if you knaker yours up i will send you another mate cheers, i will have another look next weekend, its a bit of a effort because i have to take two panels off to get under the seat, as the lock is broke
|
|
|
Post by cb50j on Jan 22, 2006 18:00:14 GMT
you must have the patience of a saint (or something)...think I'd be bursting the lock.................... #sprint#
|
|