|
|
Post by mattdawes on Jan 15, 2006 16:26:38 GMT
I have just bought a new Baotian 50qt and i have got it derestricted from the gargage that i bought it from.
I have taken it for a ride and it will only reach about 38 and then hit what i call "a dead spot" where the acceleration seems to stop and it wont go any faster.
I also live in a hilly area and need as many extra mphs as i can to get up the hills without embarassment.
Please could someone help me/give some advice.
Many Thanks
|
|
|
|
Post by hypojam on Jan 15, 2006 17:02:07 GMT
|
|
|
|
Post by BillyGreen1973 on Jan 15, 2006 18:08:14 GMT
He's right, changing the rollers is the way to go.
You'll get better acceleration, it won't slow down as you go up hill.
You may not notice any extra on the top end though.
|
|
|
|
Post by mattdawes on Jan 16, 2006 19:26:04 GMT
When should i do this as i've only done 24 (km i think it is) on my ped. I live in a really hilly area so how will it help the speed up hills but not top speed.
I've derestricted it already.
|
|
|
|
Post by BillyGreen1973 on Jan 16, 2006 20:03:26 GMT
Lighter rollers let the engine rev higher. The engine produces it's max power at around 8500 rev/min. If your going up hill and reving around 8000 rpm, your going to fly up hill. The engine will have a max revs of around 10500 rev/min so your top end won't go any higher than it did before.
|
|
|
|
Post by r08813 on Jan 16, 2006 23:41:50 GMT
Don't change anything, your scooter has not run in enough yet.
|
|
|
|
Post by Badobsession (the real one) on Jan 16, 2006 23:56:28 GMT
If you have steep hills dont bother its only a ped  |
|
|
|
Post by cb50j on Jan 18, 2006 20:58:11 GMT
Don't change anything, your scooter has not run in enough yet. when can you consider your scooter as being run in? I'm keen to get on with rollers and other mods but I've only done about 350kms. I've changed the oils and plug so far ps...rpms way up into the red,dangerously exciting.....I havent seen mine rev above 6000 under load?  is that a sign of not being run in yet? I'm only about 11 stone |
|
|
|
Post by BillyGreen1973 on Jan 18, 2006 21:07:04 GMT
What model scoot do you have.
Can you post a pic of your clocks etc.
|
|
|
|
Post by cb50j on Jan 18, 2006 21:20:07 GMT
|
|
|
|
Post by cb50j on Jan 19, 2006 12:54:42 GMT
Lighter rollers let the engine rev higher. The engine produces it's max power at around 8500 rev/min. If your going up hill and reving around 8000 rpm, your going to fly up hill. The engine will have a max revs of around 10500 rev/min so your top end won't go any higher than it did before. was looking ay tech spec for my scooter on ABMs site.......max power 2.3kw/7500rpm are the above changes due to derestriction and the change in rollers? |
|
|
|
Post by BillyGreen1973 on Jan 19, 2006 16:30:32 GMT
Thanks for the pic.
The revs I mentioned above was information I got from a American forum site.
They are not that different, 500 or so revs either way doesn't really make much difference.
|
|
|
|
Post by cb50j on Jan 19, 2006 21:22:00 GMT
|
|
|
|
Post by hypojam on Jan 19, 2006 21:43:34 GMT
Vids aint working for me  |
|
|
|
Post by cb50j on Jan 20, 2006 0:16:16 GMT
they do for me? ?? anybody else? |
|
|
|
Post by BillyGreen1973 on Jan 20, 2006 7:08:28 GMT
No, not working for me either. sorry.
|
|
|
|
Post by Macrofeet on Jan 20, 2006 17:18:11 GMT
broke for me also
|
|
|
|
Post by cb50j on Jan 20, 2006 20:21:23 GMT
fitted my 4.7g rollers,yeehaa, what a difference,revs far better and sits nicely at 45mph/7500rpm.....nobody overtook me while I was trying them out....... #thumbs_up#
|
|
is that a sign of not being run in yet? I'm only about 11 stone
