|
Post by cmtboy on Dec 25, 2005 21:24:18 GMT
Hi, I was just wondering when you geta brand new bike what rules should you stick to when running it in?
also how many miles will need to be covered before i can derestrict my bike and change rollers etc?
cheers cmtboy
|
|
|
Post by hypojam on Dec 25, 2005 21:47:22 GMT
500km before u stress test the engine
|
|
|
Post by cmtboy on Dec 26, 2005 12:58:39 GMT
cheers, are there any rules to stick by when running the bike in e.g. only use half throttle etc?
by stredd test i spose you mean no derestriction or roller changes.
|
|
|
Post by hypojam on Dec 26, 2005 13:51:42 GMT
Your gonna have to go full throttle just to keep up with the traffic Try and avoid heavy engine load when the bike is cold i guess is a good tip. Yea wait till about 500km before you derestrict and change rollers
|
|
|
Post by cmtboy on Dec 26, 2005 16:37:59 GMT
cheers hypojam
|
|
|
Post by johnbarnes1990 on Feb 5, 2006 17:07:33 GMT
Your gonna have to go full throttle just to keep up with the traffic Try and avoid heavy engine load when the bike is cold i guess is a good tip. Yea wait till about 500km before you derestrict and change rollers WHAT HAPPENS IF THE BIKE IS DE-RESTRICTED FROM NEW?? IS THAT BAD?
|
|
|
Post by cmtboy on Feb 5, 2006 21:21:48 GMT
mine was also derestricted from new
|
|
|
Post by ally1756 on Feb 5, 2006 21:51:36 GMT
it shouldnt do anything too bad just keep your revs down lower, Will be fine! Im derestricting mine as soon as i get it. ally
|
|