|
|
Post by bobian81 on Nov 22, 2005 20:06:44 GMT
 hi guys, i've being tinkering again today, on the carb needle i have it set on the bottom notch, and i've installed a homemade plastic washer under the circlip, but above the rubber seal, this efffect is pushing more fuel through hence more power, its now achieving, just shy of 40mph with me on the flat (14 stone bruiser) it even pulls 35 mph with my 12 year old son on the back, never revs over 6000 rpm. I reckon by the time its run in and I get some decent synthetic oil in it'll gain another 5-10 mph. Question is, can I tweek the carb any further ? by the way took out the 3.6gm variator rollers tonight, as they make it rev too high, but give no more speed. keep on scooting
|
|
|
|
Post by BillyGreen1973 on Nov 22, 2005 20:40:04 GMT
You will notice a difference as the bike 'runs-in', it will just seem to 'free up' one day, and then it will be about 5-10 mph faster! |
|
|
|
Post by bobian81 on Nov 22, 2005 21:03:36 GMT
billy, how come your scooter shoots across the page LOL
|
|
|
|
Post by baotian on Nov 22, 2005 21:58:09 GMT
becasue he is the new moderator of this form, he can do what the hell he likes #worshippy# #worshippy# #worshippy# lol  |
|
|
|
Post by BillyGreen1973 on Nov 23, 2005 12:43:50 GMT
Anyone can make their scooter zoom across the page! In the main reply box, there is a botton that looks like this <-M That's the Marquee button. highlight the bits you want to move across the page and then press the <-M button  |
|
|
|
Post by hypojam on Nov 23, 2005 15:46:08 GMT
|
|
|
|
Post by Ginger Phil on Nov 23, 2005 15:59:19 GMT
Honestly you guys can be so childish....
|
|
