joe
Regular
Posts: 48
|
Post by joe on Oct 27, 2005 15:47:31 GMT
Can you get sports exhausts for the Baotain BT 50 QT 9?
|
|
|
Post by Ginger Phil on Oct 27, 2005 15:56:58 GMT
Unfortunately no.
|
|
richc
Forum Master
Posts: 92
|
Post by richc on Oct 29, 2005 22:42:46 GMT
It might be expensive but because these bikes are 4 stroke zorst tec in bradford could make you a custom one i have been told!
They have a website..look in google
|
|
|
Post by hypojam on Oct 29, 2005 22:55:23 GMT
There wouldnt be much power improvement anyways Just a noise improvement
|
|
richc
Forum Master
Posts: 92
|
Post by richc on Oct 29, 2005 23:03:45 GMT
Not even full system?(wide 125 style pipe?)
|
|
|
Post by Ginger Phil on Oct 30, 2005 8:58:03 GMT
I think you'd have to be mad or very rich to get a custom exhaust made for a Chinese scooter, you might gain a few mph but it would probably cost more than you paid for the scooter.
|
|
noname
Regular
4 stroke power
Posts: 13
|
Post by noname on Nov 4, 2005 20:07:43 GMT
In polan there are exhausts for boatians - chrome ones! But they are not sport at all!
|
|
|
Post by skullseek on Nov 11, 2005 19:57:38 GMT
I will try to make one exhaust in one month or so. Then will tell U is that works.
U can try it too.
|
|
|
Post by chcknugget on Nov 12, 2005 0:47:27 GMT
Yeah I think I'm going to try and straightpipe it this winter. I don't know if it will hurt my valves too much.
Or at least I'll cut out the insides of my muffler and see what that gets me. I think they are quite restrictive!
Gas milage will be horrible though!
|
|
|
Post by hypojam on Nov 12, 2005 14:26:23 GMT
Yeah I think I'm going to try and straightpipe it this winter. I don't know if it will hurt my valves too much. Or at least I'll cut out the insides of my muffler and see what that gets me. I think they are quite restrictive! Gas milage will be horrible though! With my old exhaust i did drill 6, 1cm holes in the side of it It sounded like some noisy harley ;D but it didnt improve speed much
|
|
|
Post by skullseek on Nov 13, 2005 9:23:57 GMT
This is how it have to look. Drilling holes only U can get is nois, and straightpipe is not good too.
|
|
|
Post by hypojam on Nov 13, 2005 10:12:24 GMT
This is how it have to look. Drilling holes only U can get is nois, and straightpipe is not good too. Thats not how the inside of the exhaust looks, i will draw pic soon too show u lot
|
|
|
Post by hypojam on Nov 13, 2005 10:35:31 GMT
|
|
|
Post by skullseek on Nov 13, 2005 22:08:57 GMT
But that tiny pipe is restriction!?!
|
|
|
Post by chcknugget on Nov 16, 2005 0:49:54 GMT
When I took off the chrome pipe on the exhaust side of my cylinder head it freed up the exhaust and my acceleration improved immensly. I'm gonna do something about this sooner or later!
|
|
|
Post by Scootin on Nov 16, 2005 3:45:09 GMT
When I took off the chrome pipe on the exhaust side of my cylinder head it freed up the exhaust and my acceleration improved immensly. I'm gonna do something about this sooner or later! Hmmmmm fascinating...More acceleration you say.
|
|
|
Post by suffolk_cruiser on Nov 16, 2005 17:38:12 GMT
ummm will have to try this! could be intresting as my chome is all dirty and has heat and rust paches
|
|
|
Post by chcknugget on Nov 16, 2005 18:48:57 GMT
|
|