|
|
Post by dmilo on Sept 26, 2005 21:07:13 GMT
Hey all,
I want to derestrict my carb
There are 2 different threads one says remove the washer underneath the black cap the other says to adjust the washer on the pin .
Can someone clear this up for me
thanks
dmilo
|
|
|
|
Post by hypojam on Sept 26, 2005 21:45:38 GMT
if your engine is 80cc then it should allready be derestricted
|
|
|
|
Post by dmilo on Sept 26, 2005 22:13:57 GMT
Hi,
I still want to check it out to make sure
can you tell me which is correct
dmilo
|
|
|
|
Post by chcknugget on Sept 27, 2005 2:39:59 GMT
Could you post a pic of your carb so I can see what style it is?
I think you mean there is a thread on taking the brass screw out, and another on moving the clip on the pin down a notch. I hightly doubt there is a brass screw in your carb - It seems like they're only found in UK scooters (like the pink wire)
|
|
|
|
Post by dmilo on Oct 1, 2005 16:58:43 GMT
Hey Chuck, heres a pic of my carb sorry it took so long and your right took apart my carb today and its derestricted already I believe, there was no washer on the pin well guess I could put on a better exhaust  dmilo |
|
|
|
Post by chcknugget on Oct 4, 2005 20:22:47 GMT
Hey Chuck, heres a pic of my carb sorry it took so long and your right took apart my carb today and its derestricted already I believe, there was no washer on the pin well guess I could put on a better exhaust dmilo Yeah I believe your carb is fine... Freeing up the exhaust could do a lot for these things, I just haven't been able to find another scooter with exhaust stud holes 2" apart! |
|
|
|
Post by hypojam on Oct 4, 2005 20:24:46 GMT
Ive cut a big whole in my old exhaust! i will take some pictures tommoro and show you lot whats inside them, it looks quite wierd to me
|
|
