aron
Regular
Posts: 35
|
abs
Mar 10, 2006 18:26:53 GMT
Post by aron on Mar 10, 2006 18:26:53 GMT
the front brake unit is leaking where the pipe enters disc end its where the two nuts are but i think its pressed fitted at the factory is there any way i can fix this problem or is it a new brake unit.
|
|
|
abs
Mar 10, 2006 18:32:51 GMT
Post by BillyGreen1973 on Mar 10, 2006 18:32:51 GMT
A pic would be very helpful
|
|
aron
Regular
Posts: 35
|
abs
Mar 10, 2006 18:52:55 GMT
Post by aron on Mar 10, 2006 18:52:55 GMT
ill have to sought one out tommorow
|
|
|
abs
Mar 10, 2006 19:47:59 GMT
Post by ally1756 on Mar 10, 2006 19:47:59 GMT
yeah i need a pic but its usually a bolt holding it in ally
|
|
aron
Regular
Posts: 35
|
abs
Mar 12, 2006 12:49:01 GMT
Post by aron on Mar 12, 2006 12:49:01 GMT
its leaking from the two silver nuts
|
|
|
abs
Mar 12, 2006 13:42:17 GMT
Post by BillyGreen1973 on Mar 12, 2006 13:42:17 GMT
Just tighten the left hand nut up, then the right hand nut is a locking nut, just tighten that up as well.
|
|
|
abs
Mar 12, 2006 18:31:06 GMT
Post by ally1756 on Mar 12, 2006 18:31:06 GMT
wierd my brake pipe goes straight into the brake piston i dont have that huge thingy ally
|
|
aron
Regular
Posts: 35
|
abs
Mar 12, 2006 19:06:06 GMT
Post by aron on Mar 12, 2006 19:06:06 GMT
thats the the chamber for the ABS tried tightening still leaking
|
|
|
abs
Mar 13, 2006 11:33:08 GMT
Post by ally1756 on Mar 13, 2006 11:33:08 GMT
wjheres it leaking from?
|
|
aron
Regular
Posts: 35
|
abs
Mar 13, 2006 17:07:04 GMT
Post by aron on Mar 13, 2006 17:07:04 GMT
in the centre where them two silver nuts are going into that chamber
|
|
|
abs
Mar 13, 2006 17:33:39 GMT
Post by ally1756 on Mar 13, 2006 17:33:39 GMT
u tightened them?
|
|
|
abs
Mar 13, 2006 17:35:50 GMT
Post by ally1756 on Mar 13, 2006 17:35:50 GMT
if u have take the bolts off check for damage etc then replace it back on and it should be ok (might just not be fitted correctly) ally
|
|
|
abs
Mar 13, 2006 17:36:22 GMT
Post by ally1756 on Mar 13, 2006 17:36:22 GMT
adn ull need some more brake fluid too and ull have to bleed the system ally
|
|
aron
Regular
Posts: 35
|
abs
Mar 15, 2006 17:18:19 GMT
Post by aron on Mar 15, 2006 17:18:19 GMT
can i get rid of that chamber and bolt brake pipe straight into the caliper
|
|
|
abs
Mar 15, 2006 18:12:32 GMT
Post by BillyGreen1973 on Mar 15, 2006 18:12:32 GMT
Yeah, would be really easy and solve your problem. The ABS thing doesn't really do too much anyway
|
|
|
abs
Mar 15, 2006 19:22:27 GMT
Post by Macrofeet on Mar 15, 2006 19:22:27 GMT
if you dont wanna take it off for good
then take it off sand down anything rough on the bolts
then tighted back up if its still leaking you could get a glue gun on it or some like bath water sealent
|
|