does your scooter have this empty aswell?

[ally1756]

ok i think this may be the cause of no started button
the colours of the cabels comign otu are black and green and the start button loom has a black and a green cable too? the horn isnt working basically cos its fecked tested it it was gettign a feed but then put it onto a 12V battery and nothing but a very weak ping noise so whats that little onnector goign toon your scoots?

[baotian]

is there a female conecter which can slot into it, if so then i woiuld try conecting, as long as the wires are the same coulor. this is what happend to mine and as soon as i conected them it started up straight away.

[ally1756]

nah theres no female connector

[mattiebabes]

on the horn there is a little screw that adjust the horn try screwing it in it slowly while horn button is pressed if that doesnt work try unscrewing the other way

[ally1756]

wondered what that screw was for ill give that a try tommorow
thanks
ally:p

[ally1756]

ok emailed the guy he sent me a new horn, works great, as for the little empty block connection, the brake light and the electric start werent working so i follwed the cables down and behind a big hunk of plastic it was hiding hooked them up and now it works! woot!
ally

[BillyGreen1973]

Good to see your up and running!

[duff]

if you look around on there your find atleast 5 lose conectors there not in use thogh as there probs for othere models they just add the same loom to all of them at the factory i exspect.

[ally1756]

nah i connected it up, theres no other loose wires or connectors in the block
ally

[duff]

lol mine has 3 lose ones i can find so far evry thing works okay thogh.