FUEL GUAGE WALKTHROUGH!

[ally1756]

This walkthrough is for those moped owners who's fuel gauges have gone FUBAR

You'll need :

A can of WD40 or a can of TT
1 Flat headed Screwdriver
1 Pair of Long Nose Pliers

1) Remove the seat



2) With the Long nose Pliers Grasp the little grips on each side of the Fuel guage Retaining Clip and spin it round till it pops up



3) Carefully Lift out the Guage being careful not to bend it



4) Gently Scrape the bulk of the rust from the gauge then give it a spray of WD40 repeat this untill it moves freely

5) Reinsert the Guage into the tank taking care to make sure the clips meet up

Any constructive critiscism is welcomed

ally

[Scootin]

Well done Ally! #thumbs_up#

[planty]

i need help some 1 please help me i have just recently bought a baotian bt49qt-7 second hand and there is a problem with it it wont go any where it will start up fine and every thing but it doesnt move at all apart from moving a few inchs if you give it a bit of a push you can rev it to the max and the wheel will spin but not very fast can some 1 help or point me in the right direction please

[cecinho]

hello wat is WD40 ? ty a lot

[dmilo]

Hey Cecinho
heres a link you can read about its uses
www.wd40.co.uk/index.cfm?articleid=1519
dmilo

[gazza1]

very useful guide and im sure it will come in handy at some point, thanks alot