|
Post by cmtboy on Jan 20, 2006 21:59:05 GMT
hi everyone, i finally got my new chituma after waiting since november had a quick go on it and it is faster then i thought it would be, pulls quite hard. I have managed 32 out of it which im pleased with, on a light slop though but has only done 3 miles. I will post some pictures tommorrow hopefully. I have had a few problems with it i.e. couldnt start it, indicators dont work, horn doesnt work, but i think this is just loose wiring. any ideas? cheers cmt boy
|
|
|
Post by cmtboy on Jan 20, 2006 22:00:10 GMT
ill just add that the startin issue has been solved, the spark plug cap did not connect to the spark plug properly but after removing a small part it works fine now.
|
|
|
Post by cb50j on Jan 21, 2006 11:00:34 GMT
Hiya, I think a lot of us have had some kind of wiring problems,none seem to be a major problem. Make sure once you get them sorted out, tape them up with insulating tape. I've used silicon sealant on a couple of potential water trapping problem zones and I've smeared my cdi connections with vaseline(less messy than grease) ....... #sprint#
|
|
|
Post by chcknugget on Jan 25, 2006 2:05:47 GMT
had a quick go on it and it is faster then i thought it would be, pulls quite hard. I have managed 32 out of it which im pleased with, on a light slop though but has only done 3 miles. This is a good speed for 50cc!
|
|
|
Post by cmtboy on Jan 25, 2006 21:23:07 GMT
yeh it was on a slope tho so that would have helped
|
|