|
Post by baotian on Jan 15, 2006 18:15:38 GMT
|
|
|
Post by baotian on Jan 15, 2006 18:16:12 GMT
YEA IT WORKED #woohoo#
|
|
|
Post by baotian on Jan 15, 2006 18:22:48 GMT
ok so this is my ped with the problem that i was having a while ago, and i have tryed changing the mixture settings
|
|
|
Post by BillyGreen1973 on Jan 15, 2006 18:26:49 GMT
The video is good for showing the problem your having, However, would it be possible for you to change the titles, as the forum doesn't really allow bad language. After all we don't want to offend anybody.
Thanks
|
|
|
Post by baotian on Jan 15, 2006 18:28:38 GMT
sorry, but i was just testing the editing softwere, im sure we are all adults on here, arnt we?? #WTF#
|
|
|
Post by BillyGreen1973 on Jan 15, 2006 18:41:41 GMT
We are all adults, But it is a rule set by the forum provider (Proboards), not to have any bad language. They could, if they wanted to, delete the whole board!!!
|
|
|
Post by baotian on Jan 15, 2006 18:48:13 GMT
ok no proble i will edit it asap sorry for any inconveniance
|
|
|
Post by hypojam on Jan 15, 2006 18:48:20 GMT
This is what happened to me when my carb was full of dirt, i recommend a carb strip down and clean up then readjustment of the fuel mixture.
|
|
|
Post by hypojam on Jan 15, 2006 18:50:34 GMT
also this problem occurred when i fitted my freeflow filter without upjetting check your jets for blockages and if needed change fuel filter
|
|
|
Post by hypojam on Jan 15, 2006 18:51:53 GMT
and also dont be so violent with the throttle, its not a power switch its a power tap
|
|
|
Post by BillyGreen1973 on Jan 15, 2006 18:52:58 GMT
ok no proble i will edit it asap sorry for any inconveniance Thanks I will remove the others when you have set up a new one
|
|
|
Post by baotian on Jan 15, 2006 19:07:42 GMT
cheers hypojam
|
|
|
Post by baotian on Jan 15, 2006 19:08:45 GMT
ok i dont know how to remove it so if u would liek to remove them billy as i dont know how to
|
|
|
Post by ally1756 on Feb 3, 2006 16:40:14 GMT
i think because ure pushing the throttle round so quickly, your just flooding it with fuel so it doesnt go bang and starts misfiring if u get what i mean, i know theres only oen cyclinder but i bet the problem doesnt happen when u turn the throttle slower ally
|
|
|
Post by baotian on Feb 3, 2006 22:47:13 GMT
yea thats what i thoght, but it still happens just as bad, if not worse no matter how gently i do it, but ive screwed in the idle screw a bit and now that the bike revs alot more it hardly doese it, but it doese sometimes try and move the bike when standstill, but only a tiny bit
|
|
|
Post by ally1756 on Feb 3, 2006 23:27:37 GMT
kool, very wierd problem to occur :S ally
|
|