aron
Regular
Posts: 35
|
Post by aron on Mar 17, 2006 22:22:21 GMT
can anyone tell me the best way to fit neons wiring ect.
|
|
|
|
Post by ronaldihino1 on Mar 17, 2006 23:39:34 GMT
you'll need cable ties to tie them onto framework or something else and depending on where you put them you might have to get some cable extensions. Also, smear sillicone on them after fitting to stop water leaking into them like chcknugget advised. Could you be more precise as to what you mean by wiring etc,, because its quite simple.
|
|
|
|
Post by ally1756 on Mar 18, 2006 0:14:18 GMT
where r u putting them?
|
|
aron
Regular
Posts: 35
|
Post by aron on Mar 18, 2006 15:50:38 GMT
underneath the front
|
|
|
|
Post by ally1756 on Mar 18, 2006 16:26:17 GMT
?  |
|
|
|
Post by chcknugget on Mar 19, 2006 3:26:25 GMT
The neons should come with a little transformer. Just hook them up to 12V and they work. Put a switch on and you can turn them on and off. Put a relay in there and you can keep the amps from running through your switch.
|
|
