spirite29
Regular
The mighty SPIRITES
Posts: 28
|
Post by spirite29 on Sept 5, 2006 14:27:15 GMT
Hi everyone,
Could someone please tell me what i need to do. The scooter QT 50-7 keeps cutting out now and again mainly when i stop. The spark plug does not fit well so i taped it down with elec tape which seems to be ok but now its started cutting out. HELP
|
|
|
Post by Rusty on Sept 5, 2006 14:29:17 GMT
what do you mean the spark plug does not fit well?
|
|
spirite29
Regular
The mighty SPIRITES
Posts: 28
|
Post by spirite29 on Sept 5, 2006 14:30:21 GMT
The rubber connecter does not clip in
|
|
spirite29
Regular
The mighty SPIRITES
Posts: 28
|
Post by spirite29 on Sept 5, 2006 14:31:34 GMT
Not had sooter long and just learning
|
|
spirite29
Regular
The mighty SPIRITES
Posts: 28
|
Post by spirite29 on Sept 5, 2006 14:33:25 GMT
Should say scooter lol
|
|
|
Post by enu06 on Sept 5, 2006 14:48:25 GMT
Dont be afraid to push it hard down, you spark is probably traveling the easiest route, down the plug and out to the cylinder head giving you a weak spark. There is a thread on top of the plug, and a spring clip inside the cap PUSH HARD and you should feel the cap going over the threads. You may have to fiddle it to get it central, but it will go.
|
|
spirite29
Regular
The mighty SPIRITES
Posts: 28
|
Post by spirite29 on Sept 5, 2006 14:54:27 GMT
Thanks i will give it a go
|
|
spirite29
Regular
The mighty SPIRITES
Posts: 28
|
Post by spirite29 on Sept 5, 2006 15:19:50 GMT
|
|
|
Post by enu06 on Sept 5, 2006 15:27:11 GMT
Yes it should have a 'hook bit' just like a car. If you have to replace it get an NGK CR7HSA or or HIX avaliable from bike shops or Halfords.
|
|
spirite29
Regular
The mighty SPIRITES
Posts: 28
|
Post by spirite29 on Sept 5, 2006 19:39:55 GMT
Thanks Enu06 that helped and i also tried the air mixture nut and that seemed to do the trick A one website
|
|