|
Post by dmilo on May 20, 2006 17:54:06 GMT
Hey all, can anyone tell me what size is the variator nut?. Im going to buy an impact wrench , need to know what size socket to get dmilo
|
|
|
Post by hypojam on May 20, 2006 18:07:40 GMT
17mm
Most impact wrenches come with various sized sockets anyways... So hopefully you wont need to buy a separate one...
|
|
|
Post by enu06 on May 20, 2006 18:10:12 GMT
It will probably come with the sockets, mine came with 17, 19, 21 & 23, + extension.
|
|
|
Post by dmilo on May 20, 2006 18:26:20 GMT
thanks hypojam & enu I just got my 5 gram rollers they look like good quality ones dmilo
|
|
|
Post by stelvslucie on May 22, 2006 15:32:00 GMT
ware you get them from?
|
|
|
Post by dmilo on May 23, 2006 21:25:10 GMT
I got them from provoscooter.com what do you think dmilo
|
|
|
Post by stelvslucie on May 24, 2006 18:17:10 GMT
yer thay look strong.
i might get them in my scooter will thay fit?
i nead 16x13mm i was going to get them from scooter-assassins but the ones from ther are ment to be nuts and brake esey.
|
|
|
Post by newbie on May 25, 2006 11:20:49 GMT
Could somebody tell me what size is rear variator nut? I'm also going to buy an impact wrench and I need to know what size socket to get.
|
|
|
Post by ally1756 on May 25, 2006 11:38:31 GMT
there is only one variator nut and it is 17mm, it will most likely come with your imapct wrench
|
|
|
Post by newbie on May 25, 2006 11:50:13 GMT
I mean this nut
|
|
|
Post by ally1756 on May 25, 2006 11:53:01 GMT
oh i dunno then lol thats the clutch/final drive assembly not the variator lol
|
|
|
Post by dmilo on May 25, 2006 12:00:36 GMT
Stelv yes these are 16x13mm and will fit dmilo
|
|
|
Post by tls2571 on May 25, 2006 20:35:05 GMT
If it's a QMB139 engine that nut should be 10mm according to my service manual.
Troy
|
|
|
Post by newbie on May 26, 2006 13:14:01 GMT
real size is 14mm
|
|
|
Post by stelvslucie on May 26, 2006 22:12:38 GMT
it 15MM my one lol.
but i dont no how to keep the bolt still as you try and twist it off lol
|
|
|
Post by tls2571 on May 27, 2006 1:12:08 GMT
you need to get yourself a spanner wrench or some pully pliers.
Troy
|
|
|
Post by tls2571 on May 27, 2006 1:25:57 GMT
|
|
|
Post by tls2571 on May 27, 2006 1:32:53 GMT
pulley pliers
|
|